FW: Strange Nbar problems

From: Sunil Almeida (Sunil.Almeida@alicogulf.com)
Date: Wed Sep 07 2005 - 02:10:02 GMT-3


 I think I have IOS problem on the 2600 router, coz the Nested Policy
works fine on the 2800

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Sunil Almeida
Sent: Tuesday, September 06, 2005 9:42 PM
To: ccielab@groupstudy.com
Subject: Strange Nbar problems

Hi group

I am trying to configure the following Nested MQC with NBAR which does
traffic shaping and drop ICMP packet

-----------
Class ICMP
 match protocol icmp

policy-map INNER
  class ICMP
   drop
 
 policy-map OUTER
  class class-default
   shape average 16000
   service-policy INNER

interface fastethernet0/0
service-policy output OUTER
----------------

With the above statements , only the OUTER policy works , the INNER
policy doesn't However If I replace the "match protocol icmp" with
access-list it works

What am I doing wrong here , I have "ip cef" enabled

Thanks
Sunil



This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:14 GMT-3