From: Chris Lewis \(chrlewis\) (chrlewis@cisco.com)
Date: Mon Sep 05 2005 - 11:21:17 GMT-3
AFAIK, that is the only way to change these values, I don't think you
can change them independently of each other.
http://www.cisco.com/en/US/tech/tk543/tk544/technologies_tech_note09186a
00800a4754.shtml
Has a good discussion of this in case you haven't seen it.
Chris
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
gladston@br.ibm.com
Sent: Monday, September 05, 2005 7:57 AM
To: ccielab@groupstudy.com
Subject: Dual Fifo Queue Size
Do you know if it is possible to change the size of the interface high
queue when enabling dual fifo on the interface?
I could just change it indirectly, using 'hold-queue 3000 ou'.
It seems the high queue is two times the normal queue.
Output queue: high size/max/dropped 0/6000/0
Output queue: 0/3000 (size/max)
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:14 GMT-3