From: Tony Schaffran (groupstudy@cconlinelabs.com)
Date: Wed Aug 31 2005 - 13:17:16 GMT-3
You can configure two static default routes and set the comcast link with a
lower AD.
The only problem is if the comcast link fails upstream and the interface is
still UP/UP, the other default route will not go active. The comcast link
interface needs to go down for the other default route to go active.
Depending on your business needs and cost justification, there is a product
from Fatpipe that will give you redundant gateways without BGP. Check out
this web site: http://www.fatpipeinc.com/warp/
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
www.cconlinelabs.com
Your #1 choice for online Cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
George Lampron
Sent: Wednesday, August 31, 2005 9:09 AM
To: john.matijevic@gmail.com; dlu@ccs.pl
Cc: ccielab@groupstudy.com
Subject: Re: OT default gateway
I have. A location in denver and one in aspen with a T1 between both
locations
The Aspen location also has a comcast cable modem for internet which is
unreliable.
How do is set 2 default routes in aspen so internet raffic travels down the
T1 when the comcast link is down
--------------------------
Sent from my BlackBerry Wireless Handheld
-----Original Message-----
From: nobody@groupstudy.com <nobody@groupstudy.com>
To: dlu@ccs.pl <dlu@ccs.pl>
CC: ccielab@groupstudy.com <ccielab@groupstudy.com>
Sent: Wed Aug 31 10:01:38 2005
Subject: Re: pix active/active and default gateway
Hello Dariusz,
You can configure failover with 2 pixes, but you need to make sure you have
unrestricted license for both of your pixes.
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note0918
6
a0080094ea7.shtml
Sincerely,
John
On 8/31/05, dlu@ccs.pl <dlu@ccs.pl> wrote:
>
> Hi guys,
>
> I have two pix 515E: UR and FO-AA. I configured two context on each pix.
> But in inside network I have four IP addresses: two pair instead only one
> address as default-gateway to my inside hosts? It is possible configured
> these pix with active-active mode and one default-gateway to my inside
host?
>
> hsrp, vrrp or glbp...
>
> Can anyone help me?
>
> Dariusz Luczak
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- John Matijevic, CCIE #13254 U.S. Installation Group Senior Network Engineer 954-969-7160 ext. 1147 (office) 305-321-6232 (cell)
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:20 GMT-3