From: john matijevic (john.matijevic@gmail.com)
Date: Wed Aug 31 2005 - 13:01:38 GMT-3
Hello Dariusz,
You can configure failover with 2 pixes, but you need to make sure you have
unrestricted license for both of your pixes.
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186
a0080094ea7.shtml
Sincerely,
John
On 8/31/05, dlu@ccs.pl <dlu@ccs.pl> wrote:
>
> Hi guys,
>
> I have two pix 515E: UR and FO-AA. I configured two context on each pix.
> But in inside network I have four IP addresses: two pair instead only one
> address as default-gateway to my inside hosts? It is possible configured
> these pix with active-active mode and one default-gateway to my inside
host?
>
> hsrp, vrrp or glbp...
>
> Can anyone help me?
>
> Dariusz Luczak
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- John Matijevic, CCIE #13254 U.S. Installation Group Senior Network Engineer 954-969-7160 ext. 1147 (office) 305-321-6232 (cell)
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:20 GMT-3