From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Wed Aug 31 2005 - 02:09:04 GMT-3
This should help you:
Hardening Cisco Routers: Chapter 10 NTP
http://www.oreilly.com/catalog/hardcisco/chapter/ch10.html
Network Time Protocol: Best Practices White Paper
http://www.cisco.com/en/US/tech/tk869/tk769/technologies_white_paper0918
6a0080117070.shtml
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
toonsh dosh
Sent: Tuesday, August 30, 2005 9:59 PM
To: ccielab@groupstudy.com
Subject: NTP server and NTP peer command
Hi ,
Could someone explain the usage of these commands and when to use one
over
the other.
Thanks
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:20 GMT-3