From: marvin greenlee (marvin@ccbootcamp.com)
Date: Thu Aug 25 2005 - 14:29:24 GMT-3
What version are you running on the 2621? RRI was added to IOS in 12.2(8)T,
with additional options added in later versions.
Command reference - reverse route -
http://www.cisco.com/en/US/products/ps6350/products_command_reference_chapte
r09186a0080444bee.html#wp1175317
Marvin Greenlee, CCIE#12237, CCSI# 30483
Network Learning Inc
marvin@ccbootcamp.com
www.ccbootcamp.com (Cisco Training)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Mike
O
Sent: Thursday, August 25, 2005 7:48 AM
To: Richard.Dumoulin@vanco.fr; ccielab@groupstudy.com
Subject: RE: RE : VPN ip pool into OSPF [bcc][faked-from]
Importance: Low
I'm terminating on a 2621 so I don't it will work. RRI looks like its only
supported in VPN concentrators.
>From: Richard Dumoulin <Richard.Dumoulin@vanco.fr>
>Reply-To: Richard Dumoulin <Richard.Dumoulin@vanco.fr>
>To: "'Mike O'" <mikeeo@email.msn.com>, ccielab@groupstudy.com
>Subject: RE : VPN ip pool into OSPF
>Date: Thu, 25 Aug 2005 13:34:25 +0100
>
>You need to configure RRI and then redistribute static in the OSPF process
>
>-- Richard
>
>-----Message d'origine-----
>De : Mike O [mailto:mikeeo@email.msn.com]
>Envoyi : jeudi 25 ao{t 2005 05:03
>@ : ccielab@groupstudy.com
>Objet : VPN ip pool into OSPF
>
>I don't know if I should be sending this problem to this group. But Im
>trying to get the group of IPs that the cisco clients get into the OSPF
>routing table. I assign them with ip pool ip-start ip-end and the VPN
>clients get the IP assigned but I can't ping anything in the network.
>
>Any ideas?
>
>Thanks
>Mike
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
>
>
>**********************************************************************
>Any opinions expressed in the email are those of the individual and not
>necessarily the company. This email and any files transmitted with it are
>confidential and solely for the use of the intended recipient. If you are
>not
>the intended recipient or the person responsible for delivering it to the
>intended recipient, be advised that you have received this email in error
>and
>that any dissemination, distribution, copying or use is strictly
>prohibited.
>
>If you have received this email in error, or if you are concerned with the
>content of this email please e-mail to: e-security.support@vanco.info
>
>The contents of an attachment to this e-mail may contain software viruses
>which could damage your own computer system. While the sender has taken
>every
>reasonable precaution to minimise this risk, we cannot accept liability for
>any damage which you sustain as a result of software viruses. You should
>carry
>out your own virus checks before opening any attachments to this e-mail.
>**********************************************************************
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:20 GMT-3