From: Morakinyo Salami (msa@emperion.net)
Date: Tue Aug 23 2005 - 08:54:52 GMT-3
Hi All,
I have NAT configured on my edge internet router. The NAT translation
has the internal IP Address translated to a different IP that is not
configured on the Router. The inside IP belongs to a web server. The NAT
is working fine because the users are browsing okay. What is however
perplexing and that I need to understand is that when I do a trace route
to the Internal IP of the Web server, it stops at the Inside global IP
address. Also note that the ISP is routing traffic for both the inside
local IP and the inside global. I would expect that a trace route from
the internet should take me to the inside local address as the traffic
is coming in from the outside and should not get translated. Thoughts on
this will be highly appreciated. Thanks.
Regards,
Morakinyo.
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:20 GMT-3