From: Wang Dehong-DWANG1 (Dehong.Wang@motorola.com)
Date: Tue Aug 23 2005 - 12:34:32 GMT-3
I could be wrong. I think that you will need cef if you use nbar. Otherwise it seems ok to use both of them without enabling cef, at least on command lines. - Dehong
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Lee Donald
Sent: Tuesday, August 23, 2005 10:34 AM
To: Swaroop Potdar; ccielab@groupstudy.com
Subject: RE: Rate Limit & CEF
I have been debating this with a co-worker this morning. He had read that doc and told me you needed cef for CAR. I told him that you did NOT need cef for CAR only on the 7500 platform.
CAR was around long before CEF. The doc is abit misleading.
Regards
Lee.
-----Original Message-----
From: Swaroop Potdar [mailto:swarooppotdar@hotmail.com]
Sent: 23 August 2005 16:15
To: ccielab@groupstudy.com
Subject: Rate Limit & CEF
Hi,
Can someone pls tell me,
When i do rate-limit on an interface without using CEF it works and the documentation for the same says CEF is a pre-requisite for CAR.
The same is the case when i do class based policing.
Can someone pls clarify whether CEF is really required for both the methods.
As i am able to do the same without CEF.
Regards,
Swaroop.
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:19 GMT-3