From: Scott Morris (swm@emanon.com)
Date: Mon Aug 22 2005 - 09:15:49 GMT-3
What's the rest of the config? (e.g. Frame Relay stuff, tunnel destination,
etc.)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Ali.Huang
Sent: Monday, August 22, 2005 12:27 AM
To: ccielab@groupstudy.com
Subject: GRE Tunnel always down
Hi,group,
When I bulit a tunnel between subinterface and physical intterface and both
of them encapsulated with fram-relay,I found the line protocol of tunnel0
using subinterface always up and down.But the peer is always up.I wonder if
the tunnel interface couldn't work well on FR subinterface?
R2#sh ip int t0
Tunnel0 is up, line protocol is down
Interface is unnumbered. Using address of Serial0.24 (150.50.24.2)
Broadcast address is 255.255.255.255
MTU is 1476 bytes
-- THX. Ali.huang
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:19 GMT-3