From: Christopher M. Heffner (cheffner@certified-labs.com)
Date: Sun Aug 21 2005 - 14:18:40 GMT-3
In order to allow telnet to the outside interface you must first
explicitly enable telnet on the outside interface.
telnet x.x.x.x outside
Second you must be running the outside interface in a secure mode with
IPSec to permit telnet traffic to the outside interface.
Here is the syntax description from the 6.3 command reference guide.
========================================================================
====
If IPSec is operating, PIX Firewall lets you specify an unsecure
interface name, typically, the outside interface. At a minimum, the
crypto map command must be configured to specify an interface name with
the telnet command.
========================================================================
====
HTH.
Christopher M. Heffner, CCIE 8211, CCSI 98760
Strategic Network Solutions, Inc.
VP of Internetworking Technologies
www.certified-labs.com
"Complete CCIE R&S and Security Online Rack Rentals"
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
muath_thebest@hotmail.com
Sent: Sunday, August 21, 2005 9:43 AM
To: ccielab@groupstudy.com
Subject: how to enable telnet on the outside interface for PIX
HI,
Can any body send me the part of configuration needed to make someone on
the outside be able to do telnet on outside interface of pixfirewall.
I already enabled the telent on the inside and DMZ interfaces. but I do
not know how I can enable it for outside.
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:19 GMT-3