From: marvin greenlee (marvin@ccbootcamp.com)
Date: Thu Aug 18 2005 - 18:23:24 GMT-3
With RSPAN, the ASICs for the reflector port are used to copy the traffic to
the RSPAN VLAN. Ideally, this would be an unused port, as that port would
not be able to pass normal traffic.
Marvin Greenlee, CCIE#12237, CCSI# 30483
Network Learning Inc
marvin@ccbootcamp.com
www.ccbootcamp.com (Cisco Training)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Sean
C
Sent: Thursday, August 18, 2005 2:00 PM
To: ccielab@groupstudy.com
Subject: IEWB Lab10 V2 Task 1.6 [bcc][faked-from]
Importance: Low
Hello,
In the supplied configs for InternetworkExpert's Volume 2 Lab 10 - on task
1.6
for RSPAN. The supplied configs for Switch 2 show that the reflector port
is
Gi0/1.
I can't understand why this interface is used - it doesn't look like this
interface is part of the topology. One person in their forum supposed that
it
was a typo but there are no other comments. I was wondering if anyone else
had a reason why.
Appreciate any feedback,
Sean
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:19 GMT-3