From: Nawaz, Ajaz (Ajaz.Nawaz@bskyb.com)
Date: Wed Aug 17 2005 - 11:21:57 GMT-3
Are u using vrrp
Do you have upstreamroutercheck configured?
Is your upstream vlan# and downstream vlan# the same ?
Ajaz
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
muath_thebest@hotmail.com
Sent: 17 August 2005 14:57
To: ccielab@groupstudy.com
Subject: CSS11500
I have 2 content switches the first one do load balancing on COMM servers
the other Contenet switch do load balancing on the application servers.The
Content switch comes with only 2 ports CSS 11500. no switch modules are
installed on the CSS applience. All servers are connected to same L2 switch
and all of them have addresses from the same subnet range.
the input to the content switches coming from firewall to a L2 switch which
will distribute a connection to each Content switch"Load Balancer" .
both Load balancers have VIP from the same subnet range as the server
subnet. NO vlans is configures in this scenario.
now, we faced a spanning tree problem that one of the load balancer work at
the time while the othe one has one of its ports in bloking state.
so can you provide me of the solution of how to let the 2 load balancer work
in parallel with no ports disabled by spantree.
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:19 GMT-3