From: Mesut Abdurrahmani (mesut@kujtesa.com)
Date: Wed Aug 17 2005 - 06:05:05 GMT-3
This is what I get from HUB when I do a debug nhrp packet
1w4d: NHRP: Send Resolution Request via Tunnel100, packet size: 84
1w4d: src: 10.10.0.1, dst: 10.10.0.5
1w4d: (F) afn: IPv4(1), type: IP(800), hop: 255, ver: 1
1w4d: shtl: 4(NSAP), sstl: 0(NSAP)
1w4d: (M) flags: "router auth src-stable", reqid: 103
1w4d: src NBMA: 172.16.x.2
1w4d: src protocol: 10.10.0.1, dst protocol: 10.10.0.5
1w4d: (C-1) code: no error(0)
1w4d: prefix: 0, mtu: 1514, hd_time: 120
1w4d: addr_len: 0(NSAP), subaddr_len: 0(NSAP), proto_len: 0, pref: 0
1w4d: Responder Address Extension(3):
1w4d: Forward Transit NHS Record Extension(4):
1w4d: Reverse Transit NHS Record Extension(5):
1w4d: Authentication Extension(7):
1w4d: type:Cleartext(1), data:xxx
1w4d: NHRP: Encapsulation failed for destination 10.10.0.5 out Tunnel100
This is what I get from the spoke
03:03:03: NHRP: Encapsulation succeeded. Tunnel IP addr 172.16.x.2
03:03:03: NHRP: Send Registration Request via Tunnel100, packet size: 84
03:03:03: src: 10.10.0.5, dst: 10.10.0.1
03:03:03: (F) afn: IPv4(1), type: IP(800), hop: 255, ver: 1
03:03:03: shtl: 4(NSAP), sstl: 0(NSAP)
03:03:03: (M) flags: "unique", reqid: 4940
03:03:03: src NBMA: 172.16.x.6
03:03:03: src protocol: 10.10.0.5, dst protocol: 10.10.0.1
03:03:03: (C-1) code: no error(0)
03:03:03: prefix: 255, mtu: 1514, hd_time: 120
03:03:03: addr_len: 0(NSAP), subaddr_len: 0(NSAP), proto_len: 0,
pref: 0
03:03:03: Responder Address Extension(3):
03:03:03: Forward Transit NHS Record Extension(4):
03:03:03: Reverse Transit NHS Record Extension(5):
03:03:03: Authentication Extension(7):
03:03:03: type:Cleartext(1), data:xxx
03:03:03: NHRP: 84 bytes out Tunnel100
It's a bit strange
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:19 GMT-3