From: Anthony Sequeira (terry.francona@gmail.com)
Date: Mon Aug 15 2005 - 19:00:41 GMT-3
From a lab perspective.....you could really do a lot of
onverconfiguration if you are not careful....for the most part, just
do what they ask....here is a sample task example:
4.5 Configure EIGRP AS 1024 between R4, R5, and R6 per the network
diagram. Be sure to advertise the loopback interfaces of these routers
into the EIGRP domain.
Here I am not even pausing to think about passive interfaces - I am
configuring EIGRP on these loopbacks using the network statement and I
am moving on!
On 8/14/05, Desmond Ong <desmond.gk@netstarnetworks.com> wrote:
> Hi there,
>
> Just like to check when should I make the loopback interface passive? Being
> practising some labs and still cannot figure out when to explicitly
> diasble/enable it.
>
> Thanks
> Desmond
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:19 GMT-3