ospf demand circuit & dialer watch | mls qos

From: buesink@fma.nl
Date: Sun Aug 14 2005 - 08:25:39 GMT-3

• Next message: k_kaloianov@eircom.net: "Anybody going for the lab in Brussels on 04 October"
• Previous message: Rajib Khan: "RE: ip multicast helper-map - position of ip directed-broadcast"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Guys,

Am I right if I say the following:

The dialer-list statement should always PERMIT ospf traffic when using ospf demand-circuit.
The dialer-list statement does NOT need PERMIT ospf traffic when using dialer watch.

Second question:

when enabling MLS QOS on a switch, it says that for proper operation you need to disable flow control on all interfaces, does this mean I need to disable "flowcontrol receive" on an interface?

Regards,

Jorg.

• Next message: k_kaloianov@eircom.net: "Anybody going for the lab in Brussels on 04 October"
• Previous message: Rajib Khan: "RE: ip multicast helper-map - position of ip directed-broadcast"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:19 GMT-3