limiting mcast traffic

From: ccie2be (ccie2be@nyc.rr.com)
Date: Fri Aug 12 2005 - 15:10:45 GMT-3

• Next message: gladston@br.ibm.com: "Re: Re: config - ISDN B-Channel 2 links - up ---> Doubt"
• Previous message: gladston@br.ibm.com: "Re: RE: frame-relay de-list"
• Next in thread: Brian Dennis: "RE: limiting mcast traffic"
• Maybe reply: Brian Dennis: "RE: limiting mcast traffic"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi guys,
 
I need to limit mcast traffic to 1mbps on int fa0/3.
 
Look at this config:
 
interface FastEthernet0/3
 no switchport
 ip address 141.1.37.7 255.255.255.0
 ip pim sparse-mode
 ip multicast rate-limit out 1000
 storm-control multicast level 1.00
 
 
What's the difference, if any, between the last 2 commands?
 
Are they 100% redundant or is there some subtle difference I'm not aware of?
 
TIA, Tim

• Next message: gladston@br.ibm.com: "Re: Re: config - ISDN B-Channel 2 links - up ---> Doubt"
• Previous message: gladston@br.ibm.com: "Re: RE: frame-relay de-list"
• Next in thread: Brian Dennis: "RE: limiting mcast traffic"
• Maybe reply: Brian Dennis: "RE: limiting mcast traffic"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:19 GMT-3