From: Shanky (shankyz@gmail.com)
Date: Fri Aug 12 2005 - 02:27:34 GMT-3
Hi,
you want to ... How to make the 2 B-Channel ISDN links up altogether..so
you need to club the 2 channels together ..hence ppp multilink is a must.
Now as far as dialer load-threshold ### is concerned , it just decides at
what load you bring the 2nd channel up.
If you dont use the ppp multilink ... you will have two calls using one
channel each ..but there wont be a bundle.
Thanks
Shanky
On 8/12/05, hin ccie <hinccie@yahoo.com> wrote:
>
> Hi Guys,
>
> Need help of ISDN configuration,
> Q : How to make the 2 B-Channel ISDN links up altogether
> and using the feature dialer load-threshold
>
> Will it be
> 1. dialer load-threshold 1 either
> ppp multilink
>
> OR
> 2. just dialer load-threshold 1 either
> without ppp multilink
>
> According to Doc CD, it doesn't state the usage of ppp multilink command
>
> But once the load exceeds threshold, it will activate the 2nd B-channel,
> and I think it will need to negotiate the appropriate LCP layer and (MLP
> layer -> ppp multilink used) and the result is multilink bundle
>
> In my opinion is number 1.
>
> Could you guys show me more light of this issue ?
>
> TIA
> hino
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:19 GMT-3