From: Security Candidate (doubleccie@yahoo.com)
Date: Thu Aug 11 2005 - 05:47:02 GMT-3
yea that was true ..alghough the document on Cisco site is very confusing mentioning the break sequence keys ...only the mode button need to be hold for a bit long time thanks to the guy who previously mentioned that
Sean C <Upp_and_Upp@hotmail.com> wrote:Ahh, true. My apologies.
----- Original Message -----
From: "Sean C"
To: "Security Candidate" ;
Sent: Wednesday, August 10, 2005 4:50 PM
Subject: Re: Break key for password recovery of 3550
> Hi,
>
> Not sure what you are doing to send the 'break' signal, but this list may
> help:
>
>
http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a0080174a34.shtml
>
> HTH,
> Sean
> ----- Original Message -----
> From: "Security Candidate"
> To:
> Sent: Wednesday, August 10, 2005 3:48 PM
> Subject: Break key for password recovery of 3550
>
>
> > Hi guys ;
> > I am trying to do password recovery for 3550 switch .
> > as per Cisco document , I have to send a break signal when the switch
> boots ...the switch does give the message that it is enabled for password
> recover and i have to send the break within 5 seconds ...I am using Hyper
> terminal of WinXP machine .
> >
> > the break signal does not seem to work ..i tryied also tera term pro
.but
> no luck
> >
> > any suggestions?
> >
> > thanks
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam? Yahoo! Mail has the best spam protection around
> > http://mail.yahoo.com
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:19 GMT-3