From: Stefan Grey (examplebrain@hotmail.com)
Date: Tue Aug 09 2005 - 09:03:41 GMT-3
Could you please explain me the difference between this things ??
Task:
As an additional measure to decrease response time throughout your network,
configure R5 so that packets over 1250 bytes are limited to 2.5mbps outbound
on its interface e0/1.
solution:
class-map match-all ABOVE_1250_BYTES
match packet length min 1250
policy-map QoS
class ABOVE_1250_BYTES
police cir 2500000
here was used police cir. As far as I understood the difference between
Generic traffic shaping
and FRTS only one is that GTS could be applied not only on Frame-relay
interfaces but also on ethernet and others. Do I uderstand it correctly??
Could in this example the GTS be used?? Here is the ethernet interface. As
far as I understand the
policie cir command does the same thing ad GTS can. But GTS has more options
to configure.
Do I understand correctly the difference between GTS, police cir command
(how it is called in another way??) and FRTS. Are there any other
differences.
Thank you for replies. This questions doesn't let me sleep.
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:18 GMT-3