From: Jerry Mears \(jmears\) (jmears@cisco.com)
Date: Sun Aug 07 2005 - 12:11:53 GMT-3
I tried them all.
Jerry Mears
Systems Engineer
Cisco Systems
7900 International Drive suite 400
Bloomington, MN 55425
952-967-8333 office
952-967-8311 fax
651-470-4412 cell
jmears@cisco.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccie2be
Sent: Sunday, August 07, 2005 9:50 AM
To: Jerry Mears (jmears); ccielab@groupstudy.com
Subject: RE: Frame Relay datagramsize
What type of compression did you try?
As I recall, f/r supports 2 types - payload and header.
Tim
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
jmears@cisco.com
Sent: Sunday, August 07, 2005 10:45 AM
To: ccielab@groupstudy.com
Subject: Frame Relay datagramsize
If you see this on the test:
Set up circuit to get the following results
23:53:28: Serial0(i): dlci 103(0x1871), pkt type 0x800, datagramsize 104
23:53:28: Serial0(o): dlci 103(0x1871), pkt type 0x800(IP), datagramsize
43
23:53:28: Serial0(i): dlci 103(0x1871), pkt type 0x800, datagramsize 104
23:53:28: Serial0(o): dlci 103(0x1871), pkt type 0x800(IP), datagramsize
43
23:53:28: Serial0(i): dlci 103(0x1871), pkt type 0x800, datagramsize 104
23:53:28: Serial0(o): dlci 103(0x1871), pkt type 0x800(IP), datagramsize
43
23:53:28: Serial0(i): dlci 103(0x1871), pkt type 0x800, datagramsize 104
23:53:28: Serial0(o): dlci 103(0x1871), pkt type 0x800(IP), datagramsize
43
23:53:28: Serial0(i): dlci 103(0x1871), pkt type 0x800, datagramsize 104
23:53:28: Serial0(o): dlci 103(0x1871), pkt type 0x800(IP), datagramsize
43
How do I get the datagramsize to 43?
My first thought was compression, but that didn't work.
Thanks!
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:18 GMT-3