From: gladston@br.ibm.com
Date: Fri Aug 05 2005 - 18:26:26 GMT-3
Hi,
Is there a way to test if reliable link is ok?
This is the only message I get, from debug ppp negotiation:
*Mar 1 20:45:48: BR3/0:1 LCP: ReliableLink window 7 addr 0 (0x0B040700)
This is the config:
interface Dialer25
ip address 148.5.24.2 255.255.255.0
encapsulation ppp
dialer pool 25
dialer remote-name Rack2R4
dialer idle-timeout 10
dialer string 8358662
dialer-group 1
compress stac
no cdp enable
ppp reliable-link
ppp authentication chap
ppp multilink
ppp multilink links minimum 2 mandatory
It is configure just on this site. Remote site has this:
interface Dialer25
ip address 148.5.24.4 255.255.255.0
encapsulation ppp
dialer pool 25
dialer remote-name Rack2R2
dialer idle-timeout 0
dialer string 8358661
dialer-group 1
compress stac
no cdp enable
ppp authentication chap
ppp multilink
If I configure 'reliable-link' on both sides, connectivity does not occurs.
And there is this note on Cisco doc:
===================
Restrictions
PPP reliable link does not work with Multilink PPP.
PPP reliable link is not available on asynchronous serial interfaces, including ISDN BRI and ISDN PRI interfaces
=================
Do you have experience with reliable link to confirm it?
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:18 GMT-3