From: kumara.shunmugam@wipro.com
Date: Thu Aug 04 2005 - 08:28:39 GMT-3
Hi guys
This "IP NAT OUTSIDE " is applied on physical ATM interface rather than
Appling it to the ATM Dialer interface (PPPoA). If we apply it in ATM physical
interface as per the solution guide, the NAT will not happen. Becoz there is
no IP address directly bounded with ATM interface... The IP is assigned at
Dialer1 Interface here. But when apply the same in Dialer 1 with Dialer1
interface as an NAT overload option, the things smooth... But after some
while, the BGP peering get lost between R6 and BB1 due to some TCP 179 port
translation issues. ... When we apply this in physical interfaces,, there in
no debug ip nat output also...Ideally, we should give an interface with IP
address as a overload interface if am correct...
Any inputs will be appreciated
Shun
Confidentiality Notice
The information contained in this electronic message and any attachments to
this message are intended
for the exclusive use of the addressee(s) and may contain confidential or
privileged information. If
you are not the intended recipient, please notify the sender at Wipro or
Mailadmin@wipro.com immediately
and destroy all copies of this message and any attachments.
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:18 GMT-3