From: ccahoon@maine.rr.com
Date: Tue Aug 02 2005 - 21:43:37 GMT-3
Hi, thanks for the information I am still running into a dead end on this
one. With the route map I can match on the traffic and specify the maximum
size of a packet, but I can not find a way to limit the bandwidth.
Original Message:
-----------------
From: Sayeed Kachroo sayeedk@hotmail.com
Date: Tue, 02 Aug 2005 16:46:11 -0700
To: ccahoon@maine.rr.com, ccielab@groupstudy.com
Subject: RE: best solution
Hi
Under the route map you can put the command match lenght max min to limit
based on packet size.
HTH
Sayeed
>From: "ccahoon@maine.rr.com" <ccahoon@maine.rr.com>
>Reply-To: "ccahoon@maine.rr.com" <ccahoon@maine.rr.com>
>To: ccielab@groupstudy.com
>Subject: best solution
>Date: Tue, 2 Aug 2005 18:57:17 -0400
>
>Hi, I need some advice on how to solve a problem.
>
>I looking for the best way to classify traffic then limit the amount of
>bandwidth to 1% and limit the packet size 1024.
>
>I can classify the traffic in an access-list but the second part is
tricky,
>if I use a queue-list I cant limit the bandwidth and I havent found a
way
>to get a route-map to limit the packet size.
>
>Any suggestion would be greatly appreciated, Thanks
>
>
>--------------------------------------------------------------------
>mail2web - Check your email from the web at
>http://mail2web.com/ .
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:18 GMT-3