From: mathew@oztralia.com
Date: Tue Aug 02 2005 - 12:29:57 GMT-3
Hi
Has anyone completed the "(IGP mutual redistribution" in IEWB Vol 2 - Lab
6 Q -> 5.19 - 5.21?
I get a routing loop for the Loopback IP of SW1 (150.x.8.8).
When I clear the OPSF neighbor, everything looks fine but after that when
I clear the ip routes on all the routers, I see a routing loop.
My question is when you do the redistribution on R3, R4 & R5, what should
be the best method, I mean what I should use out the below options;
1. Simple redistribute between the 2 routing protocols without any filters.
2. Use of tags to stop looping. I am not sure how to do that.
3. Use of access-lists to control what routes being passed between on a
give router .
I believe 2nd method will be a good one and is flexible but I do not know
the login for this compared to CISCO's explanation -
http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009487e.shtml.
Any help on this very much appreciated.
mathew.
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:18 GMT-3