From: Anand Singh \(anandksi\) (anandksi@cisco.com)
Date: Tue Aug 02 2005 - 00:23:50 GMT-3
Hi All,
The connected route has admin distance of 0 and static have admin
distance of 1. As far as the default route 0.0.0.0 is concerned below
both the routes are installed and not just the lower admin distance.
Comments please ?
Thanks
-Anand
sh ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS
level-2
ia - IS-IS inter area, * - candidate default, U - per-user static
route
o - ODR, P - periodic downloaded static route
Gateway of last resort is 0.0.0.0 to network 0.0.0.0
20.0.0.0/24 is subnetted, 2 subnets
S 20.10.20.0 [1/0] via 192.168.18.2
S 20.10.10.0 [1/0] via 192.10.0.1
C 192.10.10.0/24 is directly connected, Loopback0
C 192.10.20.0/24 is directly connected, Loopback1
10.0.0.0/24 is subnetted, 1 subnets
C 10.4.36.0 is directly connected, FastEthernet3/1
C 192.10.0.0/24 is directly connected, FastEthernet3/2
164.10.0.0/24 is subnetted, 1 subnets
C 164.10.10.0 is directly connected, Serial4/0/3
C 192.168.18.0/24 is directly connected, Serial4/0/0
S* 0.0.0.0/0 is directly connected, FastEthernet3/2
[1/0] via 10.4.36.1
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:18 GMT-3