From: mmaslo@optonline.net
Date: Mon Aug 01 2005 - 19:59:53 GMT-3
Gustavo,
Try entering the following config under the eigrp process:
distance 95 172.30.200.7 0.0.0.0 10
access-list 10 permit 10.7.1.0 0.0.0.255
Hope this helps.
Matt
----- Original Message -----
From: Gustavo Novais <gustavo.novais@novabase.pt>
Date: Monday, August 1, 2005 1:13 pm
Subject: Distance command under eigrp
> Hi,
>
> I'm trying to set a distance for a route coming from an eigrp neighbor
> on segment 172.200.0.0/25. Neighbor ID is 172.30.200.7, remote
> router id
> is 192.168.7.7
> It is not working! Any thoughts why?
>
> R5#sir 10.7.1.0
> Routing entry for 10.7.1.0/24
> Known via "eigrp 1", distance 170, metric 1285120, type external
> <----------------------------------should be 95
> Redistributing via eigrp 1
> Last update from 172.30.200.7 on FastEthernet0/0, 00:00:11 ago
> Routing Descriptor Blocks:
> * 172.30.200.7, from 172.30.200.7, 00:00:11 ago, via FastEthernet0/0
> Route metric is 1285120, traffic share count is 1
> Total delay is 200 microseconds, minimum bandwidth is 2000 Kbit
> Reliability 255/255, minimum MTU 1500 bytes
> Loading 1/255, Hops 1
>
> R5#sh run | beg r ei
> router eigrp 1
> passive-interface default
> no passive-interface FastEthernet0/0
> network 172.30.200.0 0.0.0.127
> distance 95 172.30.200.7 0.0.0.0 7
> no auto-summary
> eigrp router-id 192.168.5.5
> !
> !
> !
> access-list 7 permit 10.7.1.0 0.0.0.255
> !
> !
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:18 GMT-3