From: Marvin Wu (marvinwu@gmail.com)
Date: Thu Jul 28 2005 - 22:04:58 GMT-3
I dont think you can do per packet load balancing using CEF, you have
to use process switching to do that. CEF only allow per flow load
balancing
-Marvin
On 7/28/05, gladston@br.ibm.com <gladston@br.ibm.com> wrote:
> Problem: configure per packet load balancing using CEF
>
> r1---r2-----------r3----r4
> |____________|
>
> ============
> quoted from Cisco Doc
>
> Configuring Load Balancing for CEF
>
> Load-balancing decisions are made on the outbound interface. When you configure load balancing, configure it on outbound interfaces.
> ==============
>
> I would configure global IP CEF, ip route-cache CEF on R2's interface leading to R3 (same on R3).
>
> Do you agree?
>
> I read a doc today saying to configure CEF on inbound interface.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:31 GMT-3