From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Thu Jul 28 2005 - 17:12:13 GMT-3
John,
Did you try and test every line (9-16)?
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: John Matus [mailto:john_matus@hotmail.com]
Sent: Thursday, July 28, 2005 12:39 PM
To: Brian Dennis; ccielab@groupstudy.com
Subject: RE: 2511 terminal server woes
here is the running config and the sh line 1 16.
Terminal># sh line 1 16
Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns
Int
1 TTY 9600/9600 - inout - - - 4 0 0/0
-
2 TTY 9600/9600 - inout - - - 1 0 0/0
-
3 TTY 9600/9600 - inout - - - 0 0 0/0
-
4 TTY 9600/9600 - inout - - - 0 0 0/0
-
5 TTY 9600/9600 - inout - - - 0 0 0/0
-
6 TTY 9600/9600 - inout - - - 0 0 0/0
-
7 TTY 9600/9600 - inout - - - 1 0 0/0
-
8 TTY 9600/9600 - inout - - - 1 0 0/0
-
9 TTY 9600/9600 - inout - - - 4 0 0/0
-
10 TTY 9600/9600 - inout - - - 2 0 0/0
-
11 TTY 9600/9600 - inout - - - 0 0 0/0
-
12 TTY 9600/9600 - inout - - - 0 0 0/0
-
13 TTY 9600/9600 - inout - - - 0 0 0/0
-
14 TTY 9600/9600 - inout - - - 0 0 0/0
-
15 TTY 9600/9600 - inout - - - 0 0 0/0
-
16 TTY 9600/9600 - inout - - - 0 0 0/0
-
Terminal>#sh run
Building configuration...
Current configuration : 1461 bytes
!
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Terminal>
!
logging queue-limit 100
enable secret 5 $1$Rkh1$gOFBTEytcjnPL.uXWsIre1
enable password disco
!
ip subnet-zero
no ip routing
ip host r1 2001 1.1.1.1
ip host r2 2002 1.1.1.1
ip host r3 2003 1.1.1.1
ip host r4 2004 1.1.1.1
ip host r5 2005 1.1.1.1
ip host r6 2006 1.1.1.1
ip host bb1 2007 1.1.1.1
ip host bb2 2008 1.1.1.1
ip host bb3 2009 1.1.1.1
ip host sw1 2010 1.1.1.1
ip host sw2 2011 1.1.1.1
ip host frame 2012 1.1.1.1
!
!
!
!
interface Loopback0
ip address 1.1.1.1 255.255.255.255
!
interface Ethernet0
ip address 10.51.16.18 255.255.254.0
no ip route-cache
no ip mroute-cache
!
interface Serial0
no ip address
no ip route-cache
no ip mroute-cache
shutdown
no fair-queue
!
interface Serial1
no ip address
no ip route-cache
no ip mroute-cache
shutdown
!
no ip http server
no ip classless
!
!
!
!
alias exec c conf t
alias exec r1 telnet r1
alias exec r2 telnet r2
alias exec r3 telnet r3
alias exec r4 telnet r4
alias exec r5 telnet r5
alias exec r6 telnet r6
alias exec sw1 telnet sw1
alias exec sw2 telnet sw2
alias exec bb1 telnet bb1
alias exec bb2 telnet bb2
alias exec bb3 telnet bb3
alias exec frame telnet frame
!
line con 0
transport output none
line 1 16
exec-timeout 5 0
flush-at-activation
modem InOut
no exec
transport input all
line aux 0
line vty 0 4
password cisco
login
!
end
>From: "Brian Dennis" <bdennis@internetworkexpert.com>
>To: "John Matus" <john_matus@hotmail.com>,<ccielab@groupstudy.com>
>Subject: RE: 2511 terminal server woes
>Date: Thu, 28 Jul 2005 15:19:13 -0400
>
>John,
> The "open" is just saying that the telnet session is connected.
>Why don't you just post your whole configuration here along with the
>output of the "show line 1 16" command.
>
>Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
>bdennis@internetworkexpert.com
>
>Internetwork Expert, Inc.
>http://www.InternetworkExpert.com
>Toll Free: 877-224-8987
>Direct: 775-745-6404 (Outside the US and Canada)
>
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>John Matus
>Sent: Thursday, July 28, 2005 12:07 PM
>To: ccielab@groupstudy.com
>Subject: 2511 terminal server woes
>
>ok,
>i had a bad cable on this 2511 for ports 9-16 <it has 1 port for 1-8
and
>
>another for 9-16 that use the octal cables>. i replaced the cable but
>still am unable to establish a reverse telnet session throught ports
>9-16
>when i telnet in i get a status of "open" but i don't seem to interface
>w/
>the router....i just get a blank screen and nothing when i hit enter a
>few
>times. would a bad async port still show connections as being "open"?
>it
>seems like the port is bad but perhaps i'm doing something wrong. any
>suggestions?
>
>TIA
>
>_________________________________________________________________
>Is your PC infected? Get a FREE online computer virus scan from McAfee.
>Security. http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:31 GMT-3