From: istong@stong.org
Date: Wed Jul 27 2005 - 20:07:36 GMT-3
You can increase the max queue value using "hold-queue x" -
where x is 0 - 4096. Suggest at least setting it to 150
To troubleshoot what may be causing it real time you can
check whether the traffic is going to or through the router
etc
http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a0080094791.shtml
Ian
http://www.ccie4u.com
Rack Rentals starting at only $12 and discount lab scenarios
and workbooks
> Hi Group,
>
> We have Cisco 3600 router configured in CEF mode and a
> specific interface on that router is used for passing
> management only traffic for number of other network
> devices. This interface is showing unusual lot of Input
> Queue drops thought it is an 100Mbps link and I think we
> don't have any link saturation as this passed only
> snmp/telnet/tftp kind of traffic. What else could case
> this Input Queue drops ?? Current queue length is set to
> 75. The router also configured with SPD mode Aggressive
> . Can this cause this unusual queue drops ? What are the
> ways to troubleshoot Input queue drops ??
>
> - Bala.
>
> __________________________________________________________
> _____________ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Ian Stong
http://www.ccie4u.com
"Rack Rentals and Lab Scenarios starting at only $12"
support@ccie4u.com
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:31 GMT-3