From: Schulz, Dave (DSchulz@dpsciences.com)
Date: Sun Jul 24 2005 - 19:08:28 GMT-3
Group -
I tried doing a tunnel from a router (R3) with only OSPF area 50 configured to
another (R2) through a serial link running only RIP. I set up a tunnel
(extending the area 0 to R3). But for some reason, I get the following
reoccuring message:
R3.....
06:05:16: OSPF: Rcv hello from 160.10.37.2 area 0 from Tunnel0 10.1.1.1
06:05:16: OSPF: End of hello processing
This only occurs at R3. At first, I thought the hello/dead timer were an
issue, but that is not the case. the links come up and so does the tunnel.
However, OSPF routes from area 50 will not get passed into the other routers
on area O. Here are the configs....any ideas on this one?
R2.....
interface Tunnel0
ip address 10.1.1.1 255.255.255.0
tunnel source Serial0.1
tunnel destination 172.16.1.2
!
!
interface Serial0.1 point-to-point
ip address 172.16.1.1 255.255.255.0
ip ospf network point-to-point
frame-relay interface-dlci 302 protocol ip 160.10.32.1
!
interface Serial0.2 multipoint
ip address 160.10.37.2 255.255.255.0
frame-relay map ip 160.10.37.4 214 broadcast
frame-relay map ip 160.10.37.5 215 broadcast
!
!
router ospf 1
log-adjacency-changes
no auto-cost
network 10.0.0.0 0.255.255.255 area 0
network 160.10.37.0 0.0.0.255 area 0
neighbor 160.10.37.5
neighbor 160.10.37.4
!
router rip
version 2
network 172.16.0.0
no auto-summary
!
R3.....
interface Loopback0
ip address 44.44.44.33 255.255.255.240 secondary
ip address 44.44.44.65 255.255.255.240 secondary
ip address 44.44.44.129 255.255.255.240 secondary
ip address 44.44.44.49 255.255.255.240 secondary
ip address 44.44.44.17 255.255.255.240
ip ospf network point-to-point
!
interface Tunnel0
ip address 10.1.1.2 255.255.255.0
tunnel source Serial0
tunnel destination 172.16.1.1
!
interface Serial0
ip address 172.16.1.2 255.255.255.0
encapsulation frame-relay
ip ospf network point-to-point
frame-relay map ip 160.10.32.2 203 broadcast
no frame-relay inverse-arp
frame-relay lmi-type ansi
!
!
router ospf 1
log-adjacency-changes
no auto-cost
network 10.0.0.0 0.255.255.255 area 0
network 44.44.44.0 0.0.0.255 area 50
!
router rip
version 2
network 172.16.0.0
!
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:31 GMT-3