PPPoE over IEEE 802.1Q VLANs

From: gladston@br.ibm.com
Date: Fri Jul 22 2005 - 13:45:18 GMT-3

• Next message: Ed Tan: "Re: I Failed for the 2nd time yesterday in Brussels, has the R&"
• Previous message: Dillon Yang: "Re: I Failed for the 2nd time yesterday in Brussels, has the"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Do you have any idea to test PPPoE using the devices of the lab?

The config is this:

vpdn enable
!
vpdn-group 1
 accept-dialin
  protocol pppoe
  virtual-template 6
 pppoe limit per-vlan 200
!
interface Ethernet1/0.70
 encapsulation dot1Q 70
 pppoe enable
!
interface Virtual-Template6
 mtu 1492
 ip address 100.5.115.5 255.255.255.0

Now I would like to check if it works.

• Next message: Ed Tan: "Re: I Failed for the 2nd time yesterday in Brussels, has the R&"
• Previous message: Dillon Yang: "Re: I Failed for the 2nd time yesterday in Brussels, has the"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:30 GMT-3