From: Chad Hintz (ccie_2b2004@yahoo.com)
Date: Tue Jul 19 2005 - 15:56:48 GMT-3
I have tried these 3 images
c2600-adventerprisek9-mz.124-1a.bin
c2600-advipservicesk9-mz.124-1a.bin
c2600-adventerprisek9-mz.123-11.T6.bin
I was going to use "c2600-js-mz.122-15.T16.bin" but it will not recgonize the v2 of the wic card.
Chad
Tony Schaffran <groupstudy@cconlinelabs.com> wrote:
What feature set are you running? Enterprise?
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
www.cconlinelabs.com
Your #1 choice for online Cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Chad
Hintz
Sent: Tuesday, July 19, 2005 11:47 AM
To: ccie lab
Subject: IEWB vol 1 lab 7 5.1 - 5.8
Hi all,
This is more of a version of code question. On this task it asks for isis
network point-to-point on the spokes going back to r5 that has 2 sub ints
point-to-point to each spoke for clns neighbors relationships to build. The
2 hubs are r3 and r4. My r3 is a 3640 which has the ability to issue the
command on the physical interface s1/0. On r4 my router is a 2621xm, this
is where i cannot issue this command. I have upgrade to 3 different codes
12.3,12.4 all which said on the feature navigator included isis point to
point adj over broadcast media. Yet i can issue this on the fast ethernet
interfaces but not on the serial. Please advise what version of code the
racks are using for this. Take into affect i have a wic-1dsu-t1-v2 in this
router so the normal 12.2.15T(16) ent image for the xms does not recognize
that card.
TIA,
Chad
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:30 GMT-3