From: Chad Hintz (ccie_2b2004@yahoo.com)
Date: Tue Jul 19 2005 - 15:49:34 GMT-3
"the 2 hubs" sorry was multitasking should be the 2 spokes.
Chad Hintz <ccie_2b2004@yahoo.com> wrote:Hi all,
This is more of a version of code question. On this task it asks for isis network point-to-point on the spokes going back to r5 that has 2 sub ints point-to-point to each spoke for clns neighbors relationships to build. The 2 hubs are r3 and r4. My r3 is a 3640 which has the ability to issue the command on the physical interface s1/0. On r4 my router is a 2621xm, this is where i cannot issue this command. I have upgrade to 3 different codes 12.3,12.4 all which said on the feature navigator included isis point to point adj over broadcast media. Yet i can issue this on the fast ethernet interfaces but not on the serial. Please advise what version of code the racks are using for this. Take into affect i have a wic-1dsu-t1-v2 in this router so the normal 12.2.15T(16) ent image for the xms does not recognize that card.
TIA,
Chad
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:30 GMT-3