From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Mon Jul 18 2005 - 15:57:58 GMT-3
Robbie,
Try searching our forum. There have been a few posts about this
subject.
http://forum.internetworkexpert.com
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
robbie
Sent: Monday, July 18, 2005 11:23 AM
To: ccielab@groupstudy.com
Subject: IE Workbook - Backbone routers
Has anyone come up with a half-decent way of logically provisioning the
ATM link used between R6 and BB1 as a serial link? I do not have access
to ATM equipment at the moment, but would like to substantially
replicate the IP configuration from ATM0/0 on BB1 so that I can test out
my routing protocol configurations. I am certain that I can do this
myself, but I figured I would ask before diving headlong. Sorry if this
question is redundant, I don't think I've seen anything along these
lines on the list before. Thanks!
-- Cheers, Robbie
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:30 GMT-3