From: Thomwin Chen (thomwin_chen@yahoo.com)
Date: Mon Jul 18 2005 - 11:49:04 GMT-3
Hi,
Bit 8 controls the console Break key. Setting bit 8 (the factory default) causes the processor to ignore the console Break key. Clearing bit 8 causes the processor to interpret Break as a command to force the router into the bootstrap monitor, halting normal operation. Break can always be sent in the first 60 seconds while the router is rebooting, regardless of the configuration settings.
HTH
k c <jwongccie@yahoo.com.hk> wrote:
Hi Group,
Question:
Disable password recovery on R1 to prevent a person with physical access to the router(s) from viewing the configuration file.
I would like to know besides "no service password-recovery", should I configure the configuration register, if yes, what value should I set? Thanks.
Regards,
_______________________________________
7Q'Y.I&,(l7s email 3q*>!H
$U8| Yahoo! Messenger http://messenger.yahoo.com.hk
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:30 GMT-3