From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Sat Jul 16 2005 - 13:45:57 GMT-3
Nenad,
Do you understand why the book says to use the neighbor command
when the network type is non-broadcast?
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
nenad pudar
Sent: Saturday, July 16, 2005 8:45 AM
To: ccielab@groupstudy.com
Subject: static ospf neighbor over NBMA network
Hi
This was most probably before ,sorry ,but I need to clear this.
In K. Solie's book and others it stays that the static ospf neighbor
are needed for neighbor connected using frame relay physical or
multipoint subinterfaces (Network Type NON_BROADCAST)
However in my case it works fine without static neighbor .As a matter
of fact I wander why we need static neighbor if you have fr map
broadcast statement .
How should I configure this on LAB exam ?
Am I missing something here ?
thanks
nenad
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:30 GMT-3