From: Godswill Oletu (oletu@inbox.lv)
Date: Thu Jul 14 2005 - 05:29:53 GMT-3
KC
Remember that either side, the called or the caller can disconnect the call,
looking at your configure, ip2 will disconnect the call after 30 sec of idle
time.
The idle-timeout have to be updated on both routers, if you desire to
effectively control the disconnect time.
---- Godswill Oletu----- Original Message ----- From: "k c" <jwongccie@yahoo.com.hk> To: <ccielab@groupstudy.com> Sent: Wednesday, July 13, 2005 7:22 AM Subject: ISDN problem - remote end disconnect
> Hi Group, > > No matter it is dialer-watch or demand-circuit, I always find that the > remote router (ip5) will disconnect the call about 30 sec everytime when > ip2 call ip5. Which parameter in ip5 affect this value? I suppose it > should be dialer idle-timeout, but it is not. During the lab, should I > modify the parameter (which one), otherwise the isdn will also up/down > frequently. Thanks. > > Router ip5 > interface BRI0/0 > ip address 172.16.12.5 255.255.255.0 > encapsulation ppp > dialer idle-timeout 500 > dialer enable-timeout 2 > dialer map ip 172.16.12.2 name ip2 class dialer1 broadcast 4082222222 > dialer callback-secure > dialer-group 1 > isdn switch-type basic-ni > isdn spid1 40811111111 4081111111 > no cdp enable > ppp callback accept > ppp authentication chap > end > Router ip2 > interface BRI0/0 > ip address 172.16.12.2 255.255.255.0 > encapsulation ppp > ip ospf demand-circuit > dialer idle-timeout 30 > dialer map ip 172.16.12.5 name ip5 broadcast 4081111111 > dialer-group 1 > isdn switch-type basic-ni > isdn spid1 40822222221 4082222222 > no cdp enable > ppp callback request > ppp authentication chap > end > ip2# > *Mar 1 02:08:43.849: BR0/0:1 DDR: idle timeout > *Mar 1 02:08:43.849: BR0/0:1 DDR: disconnecting call > *Mar 1 02:08:43.849: %ISDN-6-DISCONNECT: Interface BRI0/0:1 disconnected > from 4081111111 ip5, call lasted 31 seconds > *Mar 1 02:08:43.909: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to > down > *Mar 1 02:08:43.913: BR0/0:1 DDR: disconnecting call > *Mar 1 02:08:44.911: %LINEPROTO-5-UPDOWN: Line protocol on Interface > BRI0/0:1, changed state to down > > Thanks. > > 8g;if8,h)&d;6e01/d;%3ie<5g > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:29 GMT-3