From: mani poopal (mani_ccie@yahoo.com)
Date: Wed Jul 13 2005 - 08:35:07 GMT-3
Hi Dave,
Dynamic(Lock and Key) ACL is in the security configuration guide section(sub section is traffic filtering) of the univercd. Know the key difference, if asked for a user autocommand must be configured under username and if asked for all the users, auto command must be configured under line vty.
URL for dynamic ACL(IN UNIVERCD):
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fsecur_c/ftrafwl/scflock.htm
MANI
ccie2be <ccie2be@nyc.rr.com> wrote:
Dave,
This is documented on the Doc-CD in the Security Config Guide. It might be
under "Dynamic" ACL's rather than Lock and Key.
HTH, Tim
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Schulz, Dave
Sent: Tuesday, July 12, 2005 10:37 AM
To: ccielab@groupstudy.com
Subject: Lock and Key
Is anyone familiar with "lock and key" as it applies to authentication in
IOS.
Any white papers? Can't seem to locate anything on the doc cd.
dave
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:29 GMT-3