From: Evgeniy Voloshin (e.voloshin@equant.ru)
Date: Tue Jul 12 2005 - 10:27:30 GMT-3
Hi group!
I get the following message when i try to configure subinterfaces on a
router. it works but i always get this error what does it mean?
If the interface doesn't support baby giant frames
maximum mtu of the interface has to be reduced by 4
bytes on both sides of the connection to properly
transmit or receive large packets. Please refer to
documentation on configuring IEEE 802.1Q vLANs.
============== show version==============
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-IS-M), Version 12.3(6b), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Wed 19-May-04 17:57 by dchih
Image text-base: 0x60008AF4, data-base: 0x61C5A000
ROM: System Bootstrap, Version 12.2(4r)B2, RELEASE SOFTWARE (fc2)
BOOTLDR: 7200 Software (C7200-KBOOT-M), Version 12.3(6), RELEASE SOFTWARE
(fc3)
System image file is "disk0:c7200-is-mz.123-6b.bin"
cisco 7206VXR (NPE400) processor (revision B) with 114688K/16384K bytes
of memory.
Processor board ID 32922370
R7000 CPU at 350MHz, Implementation 39, Rev 3.3, 256KB L2 Cache
6 slot VXR midplane, Version 2.9
-- WBR, Yev.
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:29 GMT-3