From: Joe Rinehart (jjrinehart@hotmail.com)
Date: Fri Jul 08 2005 - 16:20:53 GMT-3
To me, 4 port is overkill...if I had the cash I would have gotten a PRI and
BRI simulator, but you can't get into those for much less than 1500-2000 and
that is just too pricey. I think a 2 port that can handle both S/T and U
interfaces is the best bet. I snagged one for $200 a few months ago and it
works great. Ironically I got mine AFTER I passed and also after my divorce
was final....
:)
Joe Rinehart
CCIE #14256, CCNP, CCDP
Data Network Consultant
AT&T Pacific Northwest Enterprise Markets
----- Original Message -----
From: "Shanky" <shankyz@gmail.com>
To: <ccielab@groupstudy.com>
Sent: Friday, July 08, 2005 2:53 AM
Subject: ISDN Simulator for CCIE R&S Lab
> Hello Everyone,
> I am planning to buy an ISDN Simulator for preparing for CCIE Lab and
need
> some urgent advice from you guys on this.
> Do I need to buy 2 port or 4 port ? and how many ? I believe a 4 port
> device should be enuf ?
> Pls share your experience with me ...and which product ...with details
such
> as ports/Models etc urgently.
> Regards
> Shanky
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:29 GMT-3