From: Sila Moni (silamoni@yahoo.com)
Date: Thu Jul 07 2005 - 15:26:02 GMT-3
Try this:
http://www.cisco.com/warp/public/698/acl200.html
--- Amit Jain <netsteps@rediffmail.com> wrote:
> Hey Dave
>
> The list no doubt looks useful, but I am still
> nowhere. In an IE example we
> needed to permit SNA traffic. Answer says:
> access-list 200 permit 0x0000 0x0D0D
> but the list you mentioned says SNA type code as
> 80D5. What is the part of
> puzzle I am missing?
> Also I could not look for Netbios type code in list.
>
> Amit
> ----- Original Message -----
> From: "Schulz, Dave" <DSchulz@dpsciences.com>
> To: "Amit Jain" <netsteps@rediffmail.com>; "Group
> Study"
> <ccielab@groupstudy.com>
> Sent: Thursday, July 07, 2005 8:29 PM
> Subject: RE: protocol type-code information on DocCD
>
>
> Amit -
>
> The type codes can be found under volume 1 of 2
> (Cisco IOS Bridging and
> IBM Networking Command Reference, Volume 1 of 2:
> Bridging, Release 12.3)
> of the configuration document CD.....
>
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/
> ibm_r1/index.htm
>
> Does this help?
>
>
> Dave Schulz
>
> Email: dschulz@dpsciences.com
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of
> Amit Jain
> Sent: Thursday, July 07, 2005 7:42 AM
> To: Group Study
> Subject: protocol type-code information on DocCD
>
> Hi
>
> In the DLSW examples where we have to permit/deny
> traffic based on
> protocol
> type-code, I am have difficulty figuring out the
> correct type-code. Can
> somebody help me locate the same on DocCd ?
>
> Amit
>
>
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:29 GMT-3