From: Rajib Khan (rajib56666@yahoo.com)
Date: Thu Jul 07 2005 - 14:58:08 GMT-3
Hi Robbie,
In this what would be the solution if I want queue 109 should be served first before tcp ftp data
Thanks
Raj
robbie <robbie@packetized.org> wrote:
Rack1R1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Rack1R1(config)#queue-list 10 protocol ip 1 list 109
Rack1R1(config)#queue-list 10 protocol ip 2 tcp ftp-data
Rack1R1(config)#queue-list 10 default 3
Rack1R1(config)#queue-list 10 queue 1 byte-count 512 limit 0
Rack1R1(config)#queue-list 10 queue 2 byte-count 5120
Rack1R1(config)#queue-list 10 queue 3 byte-count 10000
Rack1R1(config)#^Z
*Mar 11 13:19:17.194: %SYS-5-CONFIG_I: Configured from console by console
Rack1R1#show queueing cust
Current custom queue configuration:
List Queue Args
10 3 default
10 2 protocol ip list 109
10 2 protocol ip tcp port ftp-data
10 1 byte-count 512 limit 0
10 2 byte-count 5120
10 3 byte-count 10000
Rack1R1#
I get same thing, which is normal. What you forget is that by doing
"queue-list 10 protocol ip 1 list 109" then "queue-list 10 protocol ip 2
tcp ftp-data", you're moving the first statement into queue 2, because
you're matching an access-list then specific protocol type. Doing the
reverse yields these results:
Rack1R1(config)#queue-list 5 protocol ip 2 list 109
Rack1R1(config)#queue-list 5 protocol ip 1 tcp ftp-data
Rack1R1(config)#queue-list 5 default 3
Rack1R1(config)#queue-list 5 queue 1 byte-count 512 limit 0
Rack1R1(config)#queue-list 5 queue 2 byte-count 5120
Rack1R1(config)#queue-list 5 queue 3 byte-count 10000
Rack1R1(config)#^Z
Rack1R1#show qu
*Mar 11 13:22:45.656: %SYS-5-CONFIG_I: Configured from console by console
Rack1R1#show queueing custom
Current custom queue configuration:
List Queue Args
5 3 default
5 2 protocol ip list 109
5 1 protocol ip tcp port ftp-data
5 1 byte-count 512 limit 0
5 2 byte-count 5120
5 3 byte-count 10000
Rack1R1#
Incidentally, this is on c2600-j1s3-mz.123-12.bin.
Cheers,
Robbie
gladston@br.ibm.com wrote:
> Hi,
>
> Am I forgetting some basics here?
> I applyed list 109 to custom-queue 1 and IOS (12.2(15)T5, C2600-J1S3-M) shows it is applyed on queue 2
>
> sh run | b ^queue-list
> queue-list 10 protocol ip 1 list 109
> queue-list 10 protocol ip 2 tcp ftp-data
> queue-list 10 default 3
> queue-list 10 queue 1 byte-count 512 limit 0
> queue-list 10 queue 2 byte-count 5120
> queue-list 10 queue 3 byte-count 10000
>
> Rack2R1#sh queuein cus
> Current custom queue configuration:
>
> List Queue Args
> 10 3 default
> 10 2 protocol ip list 109
> 10 2 protocol ip tcp port ftp-data
> 10 1 byte-count 512 limit 0
> 10 2 byte-count 5120
> 10 3 byte-count 10000
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
-- robbie at packetized dot org
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:29 GMT-3