Re: IPv6 Show IP BGP Summary command?

From: robbie (robbie@packetized.org)
Date: Wed Jul 06 2005 - 23:43:42 GMT-3


Wouldn't "show ip bgp summary" in current releases effectively translate
to "show bgp ipv4 unicast summary"? (Pardon the semantics and possible
nitpicking, just wanting to make sure I have it right. :D )

7206OXM-ADSL#show ip bgp ?
   A.B.C.D IP prefix <network>/<length>, e.g., 35.0.0.0/8
   A.B.C.D Network in the BGP routing table to display
   all All address families
   cidr-only Display only routes with non-natural netmasks
   community Display routes matching the communities
   ... ...

7206OXM-ADSL#show bgp ?
   all All address families
   ipv4 Address family
   ipv6 Address family
   nsap Address family
   vpnv4 Address family

7206OXM-ADSL#show bgp ipv4 ?
   multicast Address Family modifier
   unicast Address Family modifier

7206OXM-ADSL#show bgp ipv4 unicast ?
   A.B.C.D IP prefix <network>/<length>, e.g., 35.0.0.0/8
   A.B.C.D Network in the BGP routing table to display
   cidr-only Display only routes with non-natural netmasks
   community Display routes matching the communities
   ... ...

Cheers,
Robbie

Brian McGahan wrote:
> Dennis,
>
> IPv6 BGP commands are formatted as "show bgp ipv6..." instead of
> "show ip bgp...". "show ip bgp summary" translates to "show bgp ipv6
> summary". Most likely in the future all the version 4 commands will be
> moved to this type of format.
>
>
> HTH,
>
> Brian McGahan, CCIE #8593
> bmcgahan@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987 x 705
> Outside US: 775-826-4344 x 705
> 24/7 Support: http://forum.internetworkexpert.com
> Live Chat: http://www.internetworkexpert.com/chat/
>
>
>
>>-----Original Message-----
>>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
>
> Of
>
>>Dennis J. Hartmann
>>Sent: Wednesday, July 06, 2005 1:58 PM
>>To: ccielab@groupstudy.com
>>Subject: IPv6 Show IP BGP Summary command?
>>
>> Anyone know the IPv6 version fo the show ip bgp summary command?
>
> I
>
>>don't know if it exists.
>>
>> I'm using the show ip bgp neighbors command and it shows the IPv6
>>neighbors BGP state, but I'd like to find a faster way.
>>
>>
>>Sincerely,
>>
>>
>>
>>Dennis J. Hartmann
>>
>>White Pine Communications
>>
>>dh8@pobox.com
>>
>>CCSI#23402/CCIP/CCNP/CCDP/CCNA/CCDA
>>
>>Cisco IP Voice Support & Design Specialist
>>
>>Cisco Optical, VPN & IDS Specialist
>>
>>MCSE
>>
>>
>
> _______________________________________________________________________
>
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>

-- 
robbie at packetized dot org <short sig army - one line sigs since 1993>


This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:29 GMT-3