From: ccie2be (ccie2be@nyc.rr.com)
Date: Tue Jul 05 2005 - 16:09:21 GMT-3
Spyros,
Let me return the favor for your previous response to my questions.
In ospf, when you configure a summary - either with the summary-address or
the area # range command, ospf automatically creates a static route to null
0 which is referred to as the discard route because any packets sent to this
address are discarded.
If you don't want this automatic route created, use the command, no discard
route.
HTH, Tim
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Spyros Kranis
Sent: Tuesday, July 05, 2005 9:34 AM
To: ccielab@groupstudy.com
Subject: ospf & discard-route command
Hi group,
I would like to ask something regarding the use of the command
discard-route!
However I found at the archives some info but it still not clear enough!
This is command is used only when we want to suppress/hide the route to null
0 when we do summarization?
Is this correct?
TIA
Skra
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:29 GMT-3