From: Anthony Sequeira (terry.francona@gmail.com)
Date: Tue Jul 05 2005 - 08:42:18 GMT-3
distribute-list {access-list-number | prefix prefix-list-name [gateway
prefix-list-name]} in [interface-type interface-number]
EIGRP no longer supports a passive interface/neighbor statement
combination like it used to. Instead Cisco allows you to limit
prefixes from certain neighbors by using the gateway keyword in the
distribute list command.
On 7/5/05, Sheikh Rahman <Sheikh.Rahman@uk.didata.com> wrote:
> Hi Group
>
> Just palying with eigrp
>
> I have got 3 router
>
> R1---- R2 ---- R3
>
> Is there any command which will enable R1 to only except route from R2 not from R3 or R1 to only accept router from R3 not from R2
>
> Thanks in advance
>
> Sheikh
>
>
> **********************************************************************
> This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager.
>
> Although Dimension Data has taken reasonable precautions to ensure no viruses are present in this email, the company cannot accept responsibility for any loss or damage arising from the use of this email or attachments.
>
> www.uk.didata.com
> **********************************************************************
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:29 GMT-3