From: Jeff Kesemeyer (groupstudy@bradshawlabs.com)
Date: Sun Jul 03 2005 - 14:17:54 GMT-3
Have the image on a tftp server and once you get the router up use the boot
system tftp command to have it remain on the router.
Here's the link: (watch the wrap)
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/ffun
_r/ffrprt2/frf010.htm#wp1017705
Jeff Kesemeyer
CCNP, CCDP, MCSE, CNE
www.bradshawlabs.com
"Your CCIE Rack Rental Source"
> From: Chad Hintz <ccie_2b2004@yahoo.com>
> Reply-To: Chad Hintz <ccie_2b2004@yahoo.com>
> Date: Sat, 2 Jul 2005 15:20:48 -0700 (PDT)
> To: ccie lab <ccielab@groupstudy.com>
> Subject: Problem on reboot of image
>
> Hi all,
>
> I am running the ent plus image(2621xm) on a 2621(64d 32f) through the
> tftpdnld -r in rommon for it to boot to this image. upon reboot of course I
> lose that image since it is not stored in flash. Is it possible to have to
> boot from that image permenantly without doing the obvious and putting it on a
> 2621xm :-).
>
> Thanks,
>
> Chad
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:29 GMT-3