From: Scott Morris (swm@emanon.com)
Date: Sun Jul 03 2005 - 09:52:51 GMT-3
Yes. Dialer-watch will work independent of interesting traffic.
If you do not have dialer-group, then only dialer-watch will bring the line
up. If you do have dialer-group, then either method will bring the line up.
HTH,
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Schulz, Dave
Sent: Sunday, July 03, 2005 8:08 AM
To: ccie2be ; ccielab@groupstudy.com
Subject: RE: Dialer Watch and Dialer Profiles
Thanks for the explanation. Then, since these are mutually exclusive...can
I use the watch list without the interesting command statements?
Dave
-----Original Message-----
From: ccie2be
To: Schulz, Dave; ccielab@groupstudy.com
Sent: 7/3/2005 3:27 AM
Subject: RE: Dialer Watch and Dialer Profiles
Dave,
I'm pretty sure that with dialer profiles you just use the dialer watch-list
command as with legacy DDR. I think the only difference in the config is
that with dialer profiles, you don't use the dialer map command for the
watched routes.
dialer watch is NOT mutually exclusive with interesting traffic. Either
interesting traffic or a missing route can be the cause of the link coming
up.
Tim
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Schulz, Dave
Sent: Sunday, July 03, 2005 2:53 AM
To: ccielab@groupstudy.com
Subject: Dialer Watch and Dialer Profiles
2 questions:
1. Is it possible to use dialer watch within dialer profiles? The only
examples on the Doc CD show them under the interface. And, if this is
possible, how do you map it to the specific watch list route?
2. If Dialer watch uses a route (read: absense of a route) to bring up the
call....then why is it necessary to have a dialer-list/dialer-group for
interesting traffic, since the route controls whether the ISDN link comes up
or not. Just trying to think like the router.
TIA...for any help on this one.
Dave
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:29 GMT-3