From: Chris Lewis \(chrlewis\) (chrlewis@cisco.com)
Date: Wed Jun 29 2005 - 11:36:06 GMT-3
MSDP will use BGP by default, the normal practice is to configure ip
msdp default-peer A.B.C.D to identify the MSDP peeer and then the route
to that peer can come from any routing method. AFAIK, this is the only
thing to be concerned about with MSDP and BGP.
Chris
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Montiean
Sent: Wednesday, June 29, 2005 12:30 PM
To: ccielab@groupstudy.com
Subject: MSDP and MBGP question
Hi,
Per my understanding, when using multicast between diference domain
like PIM-SM can consult RPF through unicast routing like BGP.
If the question asking to use MSDP. Do we need to enable MBGP along
through domains?
I tested in my home lab. MSDP works without MBGP. Look like it is
difference topic but I alway see it tied to each other when there 's
topic in many books.
Appreciated your help to shine on this.
--Montiean
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:45 GMT-3