From: John Matus (jmatus@pacbell.net)
Date: Sat Jun 25 2005 - 21:42:45 GMT-3
the dialer load-threshold command specifies "when" the second isdn channel
will be brought up based upon link utilization. the links min 2 command
specifies that both channels are to come up right away regardlesss of the
utilization.
Regards,
John D. Matus
MCSE, CCNP
Office: 818-782-2061
Cell: 818-430-8372
jmatus@pacbell.net
----- Original Message -----
From: "Lee Carter" <l2carter@yahoo.com>
To: "CCIE LAB" <ccielab@groupstudy.com>
Sent: Saturday, June 25, 2005 5:36 PM
Subject: dialer-load threshold or ppp multilink links minimum 2
>I have a generic question here.
>
> What keywords clue you in on using load threshold or
> multilink with links option.
>
> I know if they said.. Bring up second BRI when the
> load reached x percent then you are automatically
> looking at load threshold.
>
> But I have done some labs that say..
>
> Bring up both isdn channels as soon as possible. And
> the solution had load-threshold 1 eigher configured.
>
> Thanks,
>
> Lee
>
>
>
>
> ____________________________________________________
> Yahoo! Sports
> Rekindle the Rivalries. Sign up for Fantasy Football
> http://football.fantasysports.yahoo.com
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:44 GMT-3