From: Sheikh Rahman (Sheikh.Rahman@uk.didata.com)
Date: Wed Jun 22 2005 - 16:42:56 GMT-3
Hi Group,
I am having issue with the equal path load balance through eigrp
follwoing is my diagram
Sw ---- R1
---- R2
I have 2 router connectes to a switch vlan10. I have assign an ip add to
vlan 10 (1.1.1.10) R1 address .1 and r2 address .2 there is a link
between r1 and r2 netw for that link is 20.20.20.0
What I am tring to achive is sw should load balance 20.20.20.0 network.
But in the sh ip eigrp topology I just see this network learned from R2
if I turn off r2 int then it learns from R1 but it's not load balancing.
Is there any issue with eigrp if it learns route from multiple neighbor
through one interface?
Thanks is advance
sheikh
Sheikh Rahman
Support Desk Engineer
Dimension Data
Dimension Data House
Building 2 , Waterfront Business Park
Fleet Road, Fleet
Hampshire GU51 3QT
+44 (0)12 5277 9330 Office
+44 (0)12 5277 9010 Fax
Dimension Data Home Page <http://www.didata.com>
_____
Dimension Data is a leading global technology company.
**********************************************************************
This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed. If
you have received this email in error please notify the system manager.
Although Dimension Data has taken reasonable precautions to ensure no viruses
are present in this email, the company cannot accept responsibility for any
loss or damage arising from the use of this email or attachments.
www.uk.didata.com
**********************************************************************
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:42 GMT-3